Hot Forging 718 Steel Rivet Head Steam Turbine Blades Used In Hyro Turbine

Hot Forging 718 Rivet Head 2500mm Steam Turbine Blade

Company profiles
We are professional Kaplan Tubular Water Hydro Power Generator Turbine Runner Hub Center factory from China
Forging/forged with CNC Machining
For High Water Head Hydropower Project

How it works
A Pelton Water turbine is widely used in hydropower station with the heads from 80-1600m.
The Pelton wheel (Runner) is like a circular disk mounted on the rotating shaft . This circular disk has some buckets, placed at equal spacing around its circumference.
Nozzles are arranged around the wheel such that the water jet emerging from a nozzle is tangential to the circumference of the wheel.
Our pelton runner used high strength stainless steel material, Casted with machining or Forged with CNC machining, it has a good profile and high efficiency.

Where to use
1. Water head: from 80m to 1600m
2. Output Power: 500kw to 30MW
3. Machining type: casted+ manual abrading or integrally Forged + CNC
4. Diameter: from 500mm ~ 2500mm
If you are interest with the Pelton water turbine, you should send some key parameters (such as net water head, flow discharge, unit number, frequency, voltage) in your inquiry.
We can offer pelton turbine runner above 500KW, supply the runner with Forged and CNC machining, or runner with cast.

·
ISO 9001:2008, PED Certificate,API, TUVRheinland, Bureau Veritas (BV)
·

Packing and delivery